Fantom Drives MGD-16FC16A User Manual page 45

2. Place one inner bracket to the side of the chassis. Align the holes on the front
side of the inner rail to the holes on the RAID system ear. Tighten the screw
that was removed in Step1.
3. Use four M4 flat head screws to attach the inner bracket to one of the side.
Make sure the holes of the inner bracket are aligned to the holes on the side of
the RAID system.
4. Repeat Steps 1 to 3 for the other inner bracket on the left side.
5. Loosen eight M4 screws on each of the rack rails.
adjustment on the length of the rack rails to conform to the depth of the rack.
Then screw the M4 screws back to the rack rails.
FIBRE-to-SAS/SATA RAID SUBSYSTEM
Make the necessary
User Manual 45