FIBRE-to-SAS/SATA RAID SUBSYSTEM
6.2 Creating a RAID
The RAID Create option brings you through the logical sequence of screens that
enable you to create a RAID:
Select Disks
Configure RAID Options
6.2.1 Selecting the Disks
On the RAID Functions
disks that you want to include in your RAID.
To include a single disk in a RAID, simply tick the check-box on the right hand-side
of the table for the required disk.
It is also possible to select all disks for a new RAID by pressing the Select All
button.
If user wishes to deselect all disks, this can be achieved by pressing the Deselect
All button.
Once disk selection has been completed, the user can navigate to the RAID Create
screen by pressing Next button.
NOTE: You cannot have both SAS and SATA disk drives in the same
enclosure.
74
User Manual
Create RAID Set
Disks screen you can select the