FIBRE-to-SAS/SATA RAID SUBSYSTEM
Field
Logical Volume
Serial Number
Capacity (GB)
Status
RAID
Field
Host Name
Node Name
Port Name
Port 1A
Port 1B
Port 2A
Port 2B
64
User Manual
Logical Volumes
The name of the Logical Volume.
The Logical Volume Serial Number assigned by the
system.
Capacity in Gigabytes of the Logical Volume.
Shows the Logical Volume Status, such as Global or
Private.
The name of the RAID on which the Logical Volume was
created.
Hosts
The name of the Host
Node ID of the initiator.
Port Name of the initiator.
The current Login status of the host to Port A of
Controller 1. If the host is logged in to the controller
port then the Address or ALPA will be displayed. In
fabric and point-to-point modes, this field is referred to
as Address. In loop mode this field contains the ALPA. It
represents the ID of the host when connected to the
SAN.
The current Login status of the host to Port B of
Controller 1. If the host is logged in to the controller
port then the Address or ALPA will be displayed. In
fabric and point-to-point modes, this field is referred to
as Address. In loop mode this field contains the ALPA. It
represents the ID of the host when connected to the
SAN.
The current Login status of the host to Port A of
Controller 2. If the host is logged in to the controller
port then the Address or ALPA will be displayed. In
fabric and point-to-point modes, this field is referred to
as Address. In loop mode this field contains the ALPA. It
represents the ID of the host when connected to the
SAN.
The current Login status of the host to Port B of
Controller 2. If the host is logged in to the controller
port then the Address or ALPA will be displayed. In
fabric and point-to-point modes, this field is referred to
as Address. In loop mode this field contains the ALPA. It
represents the ID of the host when connected to the
SAN.
Description
Description