Fantom Drives MGD-16FC16A User Manual page 106

FIBRE-to-SAS/SATA RAID SUBSYSTEM
c. To change the port map of a Private Logical Volume, select either
"Enabled" to enable a port or "Disabled" to disable a port for this private
volume. Private volumes cannot be mapped to specific hosts on this
screen. This will have to be done on the Host Mapping screen.
d. To change the port map of a Global Logical Volume, ensure the drop-
down box of the port of interest has been set to a value other than
"Unmapped". A value of "Unmapped" disables or hides the global logical
volume on the specified ports with the effect that no hosts will be able to
access the volume, irrelevant of login port. To make a global volume
visible on a specific port, select a suitable LUN from the drop-down list.
Specifying a LUN for a port means, that the global logical volume will be
visible on the selected port at the specified LUN. This applies to all hosts
logging into that port.
e. To modify the Capacity of the Logical Volume, enter the desired capacity
in the 'Expand To (GB)' field.
106 User Manual