7. Controller IP
This menu displays the Controller IP address.
Pressing the
button will display second controller's IP address.
In a single controller configuration, the second controller's IP address will be shown
as 0.0.0.0.
NOTE: The LCD will display the IP address 2 minutes after power
on, and subsequently refreshed every 15 minutes.
If the IP address is changed or reconfigured, the LCD will
show the updated IP address within 15 minutes.
IMPORTANT!
ProSES board PRO-90-6601 will not show in the LCD the
controller's IP address after upgrading the firmware to the
web GUI version (controller FW 1.30, expander FW V389,
and proSES FW 1.18).
If proSES board is PRO-90-5601, the LCD will display the
controller's IP address after upgrade.
Refer to Appendix 1 for more information about the upgrade
process.
FIBRE-to-SAS/SATA RAID SUBSYSTEM
User Manual
43