Features Of The Ses Module - Fantom Drives MGD-16FC16A User Manual

2.3.2 Features of the SES Module

The SES Module consists of 6 features: RS-232 Port, Alarm Mute Button, Dip
Switch, Enclosure ID dial, a Hard Contact Relay, and a System Light. These
features are described as follows:
1. RS-232 Port
The RS-232 port is for SES firmware upgrade.
NOTE: There are two types of SES board: PRO-90-5601 and PRO-
90-6601. Each has different Baud Rate setting. The LCD Display
Panel will show "SES" for PRO-90-6601 and "SES2" for PRO-90-
5601.
Below are the RS-232 settings.
2. Alarm Mute Button
When the audible alarm is sounding, press this button to mute the
audible alarm.
3. Enclosure ID Dial
The Enclosure ID Dial is used to indicate the ID number of that
particular enclosure.
Enclosure
ID
1
2
3
4
5
6
7
8
9
0
Settings
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
Disk ID
Range
0 - 15
16 ~ 31
32 ~ 47
48 ~ 63
64 ~ 79
80 ~ 95
96 ~ 111
Reserved
Reserved
Reserved
38400 (PRO-90-6601)
115200 (PRO-90-5601)
8
None
1
None
Used For
st
Default for 1
Expansion (JBOD)
Expansion (JBOD)
Expansion (JBOD)
Expansion (JBOD)
Expansion (JBOD)
Expansion (JBOD)
Reserved
Reserved
Reserved
FIBRE-to-SAS/SATA RAID SUBSYSTEM
RAID Enclosure
User Manual 21