FIBRE-to-SAS/SATA RAID SUBSYSTEM
9.11 Config Save/Restore
The Administration
backup controller configuration.
This screen contains the following buttons:
Field
Restores an automatically saved configuration from the disks
Restore
currently available in the enclosures. The system will reset itself
COD
when the restoration is complete.
Save
Downloads one of two saved system configurations.
Prompts the user for the location of a previously saved
Restore
configuration. The system will need to be reset for the restored
configuration to take effect.
Warning: This facility should only be used under the direction of
our technical support team.
136
User Manual
Config Save/Restore screen can be used to restore a
Description