Table of Contents
Advertisement
2.4.2 Lock Indicator
Every Drive Carrier is lockable and is fitted with a lock indicator to indicate whether
or not the carrier is locked into the chassis or not. Each carrier is also fitted with an
ergonomic handle for easy carrier removal.
2.4.3 Disk Drive Installation
This section describes the physical locations of the hard drives supported by the
subsystem and give instructions on installing a hard drive. The subsystem supports
hot-swapping allowing you to install or replace a hard drive while the subsystem is
running.
a. The Lock Grooves are located on the carrier open button. Press the button and
the Drive Carrier handle will flip open.
b. Pull out an empty disk tray. Pull the handle outwards to remove the carrier from
the enclosure.
FIBRE-to-SAS/SATA RAID SUBSYSTEM
Drive Carrier
is Unlocked
Drive Carrier
is locked
Carrier
Open
Button
User Manual
33
Advertisement
Table of Contents
