FIBRE-to-SAS/SATA RAID SUBSYSTEM
9. Intelligent Power Management Configuration
a. Select the MAID Level for the RAID
b. Select the Inactivity Timeout (mins) after which the disks will go into
the selected power mode as configured by the MAID Level (only
configurable for MAID Level 1 and higher).
Refer to Section 6.10 Intelligent Power Management for more information.
10. Select Calculate Capacity button to get the RAID Set total capacity.
78
User Manual
MAID Level:
1 (Idle disk after timeout)
2 (Low Speed after
timeout)
3 (Standby after timeout)
Option (mins):
10, 20, 30, 45, 60
10, 20, 30, 45, 60
20, 30, 45, 60, 90, 120,
180