FIBRE-to-SAS/SATA RAID SUBSYSTEM
2.6 Rackmount Slide Rail Installation
Verify if the content of the Rail Box is complete.
2 x Rack Rails
2 x Inner
Brackets
4 x M5*P0.8
L=25mm Long
Screws
8 x M5*0.8
L=8.0mm
Round Head
Screws
12 x M4*0.7
L=6.0mm Flat
Head Screws
NOTE: To lighten the weight of the RAID system, remove the disk
trays with disk drives from the chassis.
1. Remove one screw (lower part) from the RAID system ear.
44
User Manual