Monitor Connector Specifications (Cn5) - Omron OMNUC G5 Series User Manual

3-1 Servo Drive Specifications

Monitor Connector Specifications (CN5)

Monitor Output Signal Table
Monitor Output (CN5)
Pin No.
3
Connectors for CN5 (6 pins)
Connector housing
Connector terminal
Monitor Output Circuit
3-23
Symbol Name
Analog monitor output 1
1 AM1
Analog monitor output 2
2 AM2
3 GND Analog monitor ground
−
4 Not used
−
5 Not used
−
6 Not used
Name
51004-0600
50011-8000
Servo Drive
OMNUC G5-series AC Servomotors and Servo Drives User's Manual (with Built-in EtherCAT Communications)
Outputs the analog signal for the monitor.
Default setting: Motor rotation speed 1 V/(1,000 r/min)
You can use objects 3416 hex and 3417 hex to change
the item and unit.
You can use object 3421 hex to change the output
method.
Outputs the analog signal for the monitor.
Default setting: Motor rotation speed 1 V/(1,000 r/min)
You can use objects 3418 hex and 3419 hex to change
the item and unit.
You can use object 3421 hex to change the output
method.
Ground for analog monitors 1, 2
Do not connect.
Do not connect.
Do not connect.
Model Manufacturer
Molex Japan
Molex Japan
1 kΩ
1/2 AM1/AM2
-
+
3 GND
Function and interface
Monitor equipment