Gain Adjustment Procedure - Omron OMNUC G5 Series User Manual

11-2 Gain Adjustment

Gain Adjustment Procedure

Start adjustment.
Automatic
11
adjustment?
Yes
Realtime
autotuning settings
Realtime autotuning
Operation OK?
Yes
Write to EEPROM.
Adjustment completed.
Gain Adjustment and Machine Rigidity
To improve machine rigidity:
Install the machine on a secure base so that it does not have any play.
Use couplings that have a high rigidity, and that are designed for servo systems.
Use a wide timing belt, and use a tension within the range of allowable axial load for the motor.
Use gears with small backlash.
The specific vibration (resonance frequencies) of the mechanical system has a large impact on
the gain adjustment of the servo. The servo system responsiveness cannot be set high for
machines with a low resonance frequency (low machine rigidity).
11-5
No
No
OMNUC G5-series AC Servomotors and Servo Drives User's Manual (with Built-in EtherCAT Communications)
(Default setting)
Manual tuning
Operation OK?
Yes
No
Consult OMRON.