Registering Mas-A100 Units In Masm-1 - Sony MAS-A100 Manual

Registering MAS-A100 units in MASM-1

1. Place a check mark beside the MAS-A100 units to register in MASM-1.
2. Press the [Flash] icon to start the LED lamp of the MAS-A100 flashing to confirm
its location, if necessary.
3. Set optional character strings in [Path 1], [Path 2], [Path 3], [Name], and
[Description].
For example, enter a building name, a floor number, a room name, a name for
identification, and a description.
See "Setting the name" (page 67) for the valid characters and maximum
character string length.
[Path 2] must not be left blank if [Path 3] is specified.
Notes
MASM-1 groups MAS-A100 units with the same entries for [Path 1], [Path 2],

and [Path 3] on the [Group] pane, displaying a list of the MAS-A100 units in
the same group. Accordingly, MAS-A100 units in the same room should have
the same entries for [Path 1], [Path 2], and [Path 3] under normal
circumstances.
It is recommended that the number of MAS-A100 units in a group be limited

to 20 or lower to avoid slow response in MASM-1.
4. Press the [Done] button.
MAS-A100 registration is completed.
56