Calibration; Feedback Reduction; Bass Boost (For Main) - Sony MAS-A100 Manual

Calibration

Name: Calibration
Target: Common for both Main output and Rec output
Settings: None (starts calibration)
Applicable software:
Function description
Runs beamforming and feedback canceler calibration.
For details of usage, see "5.5 Calibration" (page 62).

Feedback reduction

Name: Feedback reduction
Target: Main output
Settings: Low, Middle, High
Applicable software:
Function description
Enables/disables the feedback reduction function and controls the level of feedback
reduction.
When feedback occurs due to close proximity of the MAS-A100 and loudspeakers or
due to calibration not performed normally, the frequency of the feedback is
suppressed by lowering the gain to stop the feedback.
Setting to [High] achieves greater feedback reduction, but decreases the audio
quality.
To ensure better speech reinforcement sound quality, it is recommended that the
MAS-A100 and loudspeakers be installed so that feedback does not occur when using
the [Middle] and [Low] settings.

Bass boost (for Main)

Name: Bass Boost
Target: Main output
Settings: Off, Low, Middle, High
Applicable software:
MASM Web
MASM Web
Web
71