Sony MAS-A100 Manual page 89

For the volume of the MAS-A100, check the input volume meter of the video
conferencing system and adjust the volume of the mixer to the appropriate volume. If
the volume is too loud, abnormal noise will occur. If it is too low, the sound will cut in
and out.
Connect the audio output of PCS-XG100 to the AV/RGB INPUT audio input E connector
of the SRP-X500 to connect it to the speech reinforcement loudspeaker. Then select
input E for the remote lecture.
In this design example, the audio from other microphones (handheld microphones,
wireless microphones) connected to the speech reinforcement audio system are not
sent directly to the remote location. The sound from the speech reinforcement
loudspeakers may be captured by the MAS-A100 and then sent with poor volume and
sound quality. To also capture other handheld microphones and wireless microphones
with high audio quality, a different design approach is recommended.
Device list
No. Name
1 MAS-A100
2 MAS-A100
3 PoE HUB GS108PEv3
4 Dante DAC ADP-DAO-AU-0X2
5 Dante DAC ADP-DAO-AU-0X2
6 Windows PC
Manufacturer
Sony
Sony
NETGEAR
Audinate
Audinate
Various companies
89
Remarks
Windows 10