Masm-1 Audio Settings; System Settings - Sony MAS-A100 Manual

MASM-1 audio settings

1. Open the [Settings] tab of MASM-1.
2. Select any group in the left pane.
3. Select [Audio] from the pull-down menu.
4. Configure settings and then press the [Set] button.
The settings are saved.
Note that the microphone gain and equalizer settings are applied and saved
immediately upon being changed.

5.8. System settings

1. Select [System] from the pull-down menu.
2. Press the [Flash] icon to start the LED lamp of the MAS-A100 flashing to confirm
its location, if necessary.
3. Check the [Default Dante ID].
4. Check the MAC address.
This MAC address is used for MAS-A100 setup and operation functions. It is not
the MAC address as a Dante device. The MAC address as a Dante device can be
checked using Dante Controller.
5. Check the serial numbers.
6. Set whether to enable control from an external device.
For details, see "Appendix B. External Control" (page 112).
76