Compatible Third-Party Products; Netgear Gs108Pev3 Setup - Sony MAS-A100 Manual

PC for control
Control tower

Compatible third-party products

The following products have been confirmed to be compatible. A PoE hub will not
operate correctly and stably using the factory default settings. Follow the procedure in
the next section to change the settings before use.
Category
PoE hub

NETGEAR GS108PEv3 setup

Log in to the PoE hub web page and make the following settings. If you do not know
the IP address of the PoE hub, use the ProSAFE Plus Utility from the NETGEAR website
for search and configuration.
https://www.netgear.com/support/product/ProSafe%20Plus%20Utility#download
1. Set [IGMP Snooping Status] to [Disable]. (Factory default setting is [Enable].)
2. Set [Block Unknown Multicast Address] to [Disable].
Core network switch
Local Dante audio traffic (multicast)
Disturbance due to Dante audio traffic from another room (multicast)
Block Dante multicast traffic in core network switch
Manufacturer and model name
NETGEAR GS108PEv3
Cisco SG350-28P
Version
2.06.10
2.5.0.90
28