Sony MAS-A100 Manual page 37

100Base-T PoE
PoE L2 switch
1000Base-T
PoE
MAS-A100
Analog connection with existing audio system for speech reinforcement
using 2 MAS-A100 units
The Dante audio output of the MAS-A100 is used as the Main analog audio signal by
using an Audinate ADP-DAO-AU-0x2. The signals are mixed 1:1 using a fixed-gain
mixer, unity gain mixer, a microphone combiner, or splitter cable.
Speech reinforcement is achieved by connecting the mixer output to the line input of
an existing audio system.
To connect three or more MAS-A100 units, use one ADP-DAO-AU-0x2 unit for every
two MAS-A100 units, increase the number of input channels of the analog mixer by
the number of MAS-A100 units, and mix the signals without increasing the gain.
ADP-DAO-AU-0x1
Room mixer and
power amplifier
PC for control
Existing devices
37
Main output analog XLR3 male
+18 dBu/+4 dBu/0 dBu/
0 dBV/–10 dBV switchable
LINE IN
Loud
speaker