Command; Set Command; Get Command - Sony MAS-A100 Manual

They are ASCII characters and case sensitive.
The format of the command and an example are shown below.
Hexadecimal
53 45
code
Character S E
B.4. Command

SET command

The SET command is used to configure the MAS-A100.
Type Parameter
SET
MicActive
SET
SET Ch1MicMute
SET
SET
Ch1MicGain

GET command

The GET command is used to retrieve the status of the MAS-A100. Value is not
specified.
Type Parameter
GET
MicActive
GET Ch1MicMute
GET Ch1MicGain
54 20 4d 69 63
T M i c
Value
on
off
on
off
-60 to 12
Value
None
None
None
41 63 74 69
A c t i
Description
Set to Active state.
Set to Standby state.
Set muting on.
Set muting off.
Set the microphone gain value.
Description
Get the status (Active or Standby).
Get the status of muting (on or off).
Get the microphone gain value.
113
76 65 20 6f 6e
v e o n
0d