Network Design; Ip Address Assignment Design - Sony MAS-A100 Manual

7.2. Network design

Based on the results of the installation design, two MAS-A100 units are used with two
outputs required, one for speech reinforcement and one for remote conferencing.
Design a network with the devices and settings required for this configuration.
Network device list
No. Name
1 MAS-A100
2 MAS-A100
3 PoE HUB GS108PEv3
4 Dante DAC ADP-DAO-AU-0X2
5 Dante DAC ADP-DAO-AU-0X2
6 Windows PC

IP address assignment design

The network should be a closed network that does not connect to the Internet and
which is not connected to other devices. IP addresses should be assigned from the
192.168.0.X private IP address range with a net mask of 255.255.255.0.
No. Name
1 MAS-A100
2 MAS-A100
3 PoE HUB GS108PEv3
4 Dante DAC ADP-DAO-AU-0X2
5 Dante DAC ADP-DAO-AU-0X2
6 Windows PC
Note that the MAS-A100 requires two IP addresses.
Also, an IP address is required for the PoE hub.
Manufacturer Remarks
Sony
Sony
NETGEAR
Audinate
Audinate
Various Windows 10
companies
IP address
192.168.0.100
192.168.0.110
192.168.0.101
192.168.0.111
192.168.0.239
192.168.0.102
192.168.0.103
192.168.0.210
86
Remarks
Dante
Web UI/MASM-1
Dante
Web UI/MASM-1
Windows 10