Dsp Numbering And Location - Nortel 1002rp Maintenance And Diagnostics

Replacing voice processing boards

DSP numbering and location

DSPs are the built-in voice processing components on MPB boards.
DSPs are numbered to distinguish them in CallPilot maintenance
programs, such as the Maintenance page in CallPilot Manager. Each
DSP supports up to eight multimedia channels.
DSP numbering on MPB96 boards
The MPB96 board has 12 embedded DSPs. MPC-8 cards are not
required. If an embedded DSP is faulty, you must replace the entire
MPB96 board.
Figure 36: MPB96 board
Faceplate
DS30 link status LEDs
186
Mezzanine connector
(for future use)
PCI connector
DS30 connector
CT Bus connector
G101776
Standard 1.11
CallPilot