Removing The Front Bezel And Server Cover - Nortel 1002rp Maintenance And Diagnostics

Replacing basic chassis components

Removing the front bezel and server cover

If the maintenance task requires replacing front panel components, you
must remove the front bezel. The exception is the hard drives, which can
be accessed by simply unlocking and opening the front bezel doors.
If you require access to the server interior, remove both the front bezel
and the server cover.
Requirements
Before you remove the front bezel and server cover, gather the following
tools:
the customer's chassis keys for the front bezel doors
a flat-blade screwdriver
an antistatic wrist strap
About the front bezel doors
Two locked doors on the front of the server cover the front panel,
including the CD-ROM drive and tape drive.
These doors are part of the front bezel. You must unlock the front panel
doors before you can remove the front bezel.
110
Standard 1.11
CallPilot