To Invoke The Service Control Command From Windows - Nortel 1002rp Maintenance And Diagnostics

January 2007
sc <service_name>
ATTENTION
To invoke the Service Control command from
Windows
1 Click Start
Result: The Command Prompt window appears.
2 At the Command prompt, type sc stop "service_name", and then
press Enter.
Note: The quotation marks are required, as in the example above.
Result: The system runs the Service Control command utility.
3 Type Exit, and then press Enter to exit the Command Prompt
window.
1002rp Server Maintenance and Diagnostics
You must restart the services that you shut down
through the Service Control command after you run the
diagnostic. For details, see "Restarting services" on
page 61.
➝
Programs
Using serial port diagnostic tools
➝
Accessories
➝
Command Prompt.
55