Removing The Media Drive Carrier From The Chassis - Nortel 1002rp Maintenance And Diagnostics

January 2007
Removing the media drive carrier from the
chassis
When replacing the media hard drives, the first step is to remove the
media drive carrier from the media drive bay.
Requirements
To remove the media drive carrier from the media drive bay, you require
the following:
keys for the front bezel doors
a Phillips screwdriver
cable identification labels
a pen or pencil
Locate the media drives
The media drives (CD-ROM drive, tape drive, and floppy drive) are
shown in the bottom right corner shown in Figure 29 on page 146.
1002rp Server Maintenance and Diagnostics
Replacing media drives
145