To Start Or Stop A Component - Nortel 1002rp Maintenance And Diagnostics

January 2007
Component
MPB board
Time Switch
Multimedia Channel
Channels
DS30X link

To start or stop a component

1 Run CallPilot Manager and log in.
2 In CallPilot Manager, click Maintenance
Result: The Maintenance screen appears.
3 Click the plus sign (+) beside the CallPilot server to expand the
component tree.
4 Continue clicking the plus sign (+) until the component with which
you want to work is visible.
5 Click the hardware component that you want to start or stop.
1002rp Server Maintenance and Diagnostics
Using CallPilot Manager to monitor hardware
Effect of stopping
Takes all call processing resources on the
selected board out of service.
You cannot perform maintenance administration
on the time switch.
Takes the selected Multimedia Channel out of
service.
Takes the selected DS30X channel out of
service.
Takes the selected DS30X link out of service.
➝
Maintenance Admin.
81