To Remove The Media Drive Carrier From The Chassis - Nortel 1002rp Maintenance And Diagnostics

January 2007
To remove the media drive carrier from the
chassis
.
.
1 Remove the front bezel from the chassis. See "Removing the front
bezel and server cover" on page 110.
2 Locate the media drive carrier, and loosen the four Phillips-head
screws and washers securing the carrier to the drive bay, as shown
in Figure 30 on page 148.
1002rp Server Maintenance and Diagnostics
DANGER
Risk of electrocution
High current inside the chassis can cause severe injury.
CAUTION
Risk of equipment damage
Electrostatic discharge due to improper handling can cause
components to be damaged or rendered unusable.
Replacing media drives
147