Table of Contents
Advertisement
Table 11: TE-6300 Series Temperature Sensors (Order Separately) (Part 2 of 2)
Thermistor
(2.2k ohm)
Thermistor
(10k ohm)
Type II
1.
Two TE-6001-8 Element Holders come with the platinum-equivalent averaging sensors. Order separately to use with a
nickel averaging sensor.
2.
Order the TE-1800-9600 Mounting Hardware separately to mount the wall unit to a wallbox.
Troubleshooting
Table 12: Fault List (Part 1 of 4)
Faults
Remote Zone Temp Fail
Supply Temp Fail
TEC3000 Series Wireless Single- or Two-Stage Economizer Thermostat Controllers Installation Instructions
Mounting Style
Adjustable
Duct
Flange
Outside air
2
Wall
Well
Adjustable
Duct
Flange
Flush
Outside air
Strap-mount
Well
Probable Causes
The External Zone Temperature sensor
has been disconnected or has failed.
The External Supply Temperature
sensor has been disconnected or has
failed.
Probe Length
8 in. (203 mm)
8 in. (203 mm)
4 in. (102 mm)
8 in. (203 mm)
3 in. (76 mm)
N/A
8 in. (203 mm)
6 in. (152 mm)
8 in. (203 mm)
4 in. (102 mm)
8 in. (203 mm)
18 in. (457 mm)
4 in. (102 mm)
8 in. (203 mm)
N/A
3 in. (76 mm)
3 in. (76 mm)
6 in. (152 mm)
8 in. (203 mm)
Solutions
1. Check the wiring of the sensor.
2. If intentionally disconnected, reset sensors
through the menu.
3. If problems persist, order replacement units
and return the affected devices to Johnson
Controls under the RMA program.
1. Check the wiring of the sensor.
2. If intentionally disconnected, reset sensors
through the menu.
3. If problems persist, order replacement units
and return the affected devices to Johnson
Controls under the RMA program.
39
Product
Code Number
TE-6341A-1
TE-6341P-1
TE-634GV-2
TE-6341V-2
TE-6343P-1
TE-6344P-1
TE-6342M-1
TE-634AM-2
TE-6361A-1
TE-636GM-1
TE-6361M-1
TE-6361P-1
TE-636JM-1
TE-636GV-2
TE-6361V-2
TE-6360F-0
TE-6360F-1
TE-6363P-1
TE-636S-1
TE-636AM-2
TE-6362M-1
Advertisement
Table of Contents
