Johnson Controls TEC3010 Installation Instructions Manual page 30

Table 10: Menus and Submenus (Part 2 of 9)
Level 1 Level 2
(LCD Screen Name)
Schedule Schedule Options
Optimal Start Enable
Temp Occ Duration
Motion Sensor Timeout
Manual Occupancy Mode
Schedule Source
Display Settings Passcode Enable
Passcode*
Brightness Setting
Enable Backlight Timeout
Units
Time
Time Zone
Set Time Format
Date
Set Date Format
Show Fan Icon
Show Temp
Show Humidity
Show Off Icon
Show Hold Icon
Show Setpoint
Show Alarms
Show Occ Status
Show Unit Status
Show Date/Time
Control Setup General
Control Mode
Unit Enable
Fan Mode
Max Setpoint Offset
Fan On Delay
Fan Off Delay
Frost Protection
TEC3000 Series Wireless Single- or Two-Stage Economizer Thermostat Controllers Installation Instructions
Level 3
Available Values
(Default Values)
No Yes or No
120 minutes 0 to 300 minutes
15 minutes 15 to 240 minutes
No Override No Override, Occupied, Unoccupied
Local Local or BAS
No Yes or No
NA 0000 to 9999
* Passcode Enable = Yes
8 0 to 10 (most dim to brightest)
Yes Yes/No
IP IP or SI
—
N/A
Central All World Time Zones
24 hour 24 hour or 12 hour
—
N/A
YYYY-MM-DD YYYY-MM-DD, or Day, Month DD, YYYY,
or MM-DD-YYYY
Yes Yes or No
Yes Yes or No
Yes Yes or No
Yes Yes or No
Yes Yes or No
Yes Yes or No
Yes Yes or No
Yes Yes or No
Yes Yes or No
Yes Yes or No
Auto Auto, Cooling, or Heating
Enable Enable or Shutdown
Smart On, Auto, and Smart
3 0 to 20 degrees (°F or °C based on Units
setting under Display Settings menu)
30 seconds 0 to 120 seconds
30 seconds 0 to 120 seconds
Yes Yes or No
30
1