Johnson Controls TEC3010 Installation Instructions Manual page 13

Table 4: Touchscreen Icons (Part 2 of 3)
Icon Icon Name
Wireless
Network
Communication
Arrow
Run/Hold
No Hold/Hold
Hold/Run
Right Arrow
Fan Overrides
for Single-
speed Fans
On
Auto
Quiet
TEC3000 Series Wireless Single- or Two-Stage Economizer Thermostat Controllers Installation Instructions
Description
Indicates the signal strength of the TEC's connection to the wireless network. Blank or
three empty bars indicates that there is no connection to the PAN and the supervisory
controller.
If the signal strength bars are underlined, review the network status for more information
regarding the wireless network. This also typically indicates that communication is lost to
the ZFR Pro Coordinator Radio.
Increases or decreases a value depending on the configuration screen.
Displays the current setpoint. Hold mode is enabled by pressing the button.
Displays the current setpoint. Hold mode is not enabled.
Displays the active setpoint. Hold mode is not enabled.
Proceeds to the next screen.
Adjusts the fan override between On, Auto, and Quiet for single-speed fans.
13