Johnson Controls TEC3010 Installation Instructions Manual page 17

When in heat pump mode, the TEC controls up to two stages of compressors (Y1, Y2) for both heating and cooling.
O/B is controlled through the W1/OB output, and one stage of supplemental heat is controlled through the W2/SUP
output. To configure heat pump mode:
1. Press the Menu icon.
2. Press Equipment Setup.
3. Press Heat Pump.
4. Press Heat Pump Supported and select Yes.
5. If supplemental heating is installed, press Supp Heating Installed and select Yes.
6. Press Reversing Valve Polarity and set appropriately for the O/B input on the equipment based on if the
equipment is normally cooling until the thermostat output is activated or normally heating (Typically Normally
Heat for O and Normally Cool for B).
7. Press to save and
Configuring Heating and Cooling Stages
1. Press the Menu icon.
2. Press Equipment Setup.
3. Press General.
4. Press Number of Compressors and adjust the number of compressor inputs on the equipment being
controlled.
5. If the thermostat controller is in rooftop mode, press Number of Heating Stages and adjust the number of
heating inputs on the equipment being controlled.
6. Press to save and
Configuring Economizer
If the equipment has an analog (between 0 to 10 V) input for an economizer damper command, configure the
economizer as follows:
1. Press the Menu icon.
2. Press Equipment Setup.
3. Press Economizer.
4. Press Economizer Installed and select Yes.
5. Press to save and
6. Press Min Position and set to the percentage that the damper must be kept open to ensure fresh airflow in the
zone.
7. Press to save and
8. Press Closed Voltage and set to the voltage output at which the damper is fully closed.
9. Press to save and
10. Press Opened Voltage and set to the voltage output at which the damper is fully opened.
TEC3000 Series Wireless Single- or Two-Stage Economizer Thermostat Controllers Installation Instructions
to return to the previous screen.
to return to the previous screen.
to return to the previous screen.
to return to the previous screen.
to return to the previous screen.
17