User Lockout; Using The Usb Port - Johnson Controls TEC3010 Installation Instructions Manual

Tec3000 series wireless single- or two-stage economizer thermostat controllers
Hide thumbs Also See for TEC3010:
Table of Contents

Advertisement

Table 4: Touchscreen Icons (Part 3 of 3)
Icon
Icon Name
Home
Back
Save
Delete
Clear
Wrench
Checkmark
Exclamation
Point

User Lockout

You can select from three different levels of access at the local display to manage functionality through the
supervisory controller. This lockout is independent of any display or passcode settings. The existing temporary
occupancy capability is unaffected by this feature. User lockout hides the icons that are not operable. The lockout
levels are described in Table 5.
Table 5: User Lockout Levels
Lockout Level
State 0
State 1
State 2

Using the USB Port

The USB port allows you to quickly and easily load firmware upgrades, backup settings, and restore settings to the
TEC3000 by using a USB drive. The TEC3000 can recognize eight configuration files or firmware package files.
The USB drive format must be FAT or FAT32. The drive cannot be NTFS or USB 3.0. If you are upgrading firmware
or copying configuration files, you need the TEC3000 passcode, if it has been set up. Do not remove the USB drive
until the firmware upgrade is complete. The TEC3000 may restart and go offline to the NAE after a firmware
upgrade.
Loading the Firmware
1. Ensure that the TEC screen is on.
2. Insert the USB drive into the right side of the TEC.
See Figure 1 for the USB port location.
TEC3000 Series Wireless Single- or Two-Stage Economizer Thermostat Controllers Installation Instructions
Description
Returns the display to the main home screen.
Returns to the previous screen.
Saves the current configuration and parameter settings.
Deletes the scheduled event.
Clears the password entry on the keypad screen.
Indicates that the value is editable.
Indicates that an event or schedule is programmed for a specific day of the week.
Indicates that an error has occurred.
Capability
Allows full access to Home Screen Display Adjustments and icons (default).
Hides the Menu icon.
Only allows the screen to trigger temporary occupancy. Menu, Unit Power, the Up
and Down arrows, and Run/Hold are hidden.
14

Advertisement

Table of Contents
loading

Table of Contents