User Lockout; Configuring The Thermostat Controller - Johnson Controls TEC3000 Series Quick Start Manual

Table 4: Touchscreen icons
Icon and icon name
Fan Overrides for
Single-speed Fans
On
Auto
Quiet
Occupancy Status
Unoccupied
Occupied
Temporarily
occupied
Standby
Override-
occupied
Override-
unnoccupied
Back
Forward
Home
Save
TEC3000 Series Networked and Wireless Single- or Two-stage Economizer Thermostat Controllers Quick Start Guide
Description
Adjusts the fan override between
On, Auto, and Quiet for single-
speed fans.
Adjusts the occupancy between
Unoccupied, Occupied,
Temporarily occupied,
Standby, Occupancy override,
Unoccupancy override.
Moves the display to the
previous screen.
Moves the display to the next
screen.
Returns the display to the main
home screen.
Saves the current configuration
and parameter settings.
Table 4: Touchscreen icons
Icon and icon name
Delete
Clear
Exclamation point

User lockout

You can select from three different levels of access at
the local display to manage functionality through the
supervisory controller. This lockout is independent of
any display or passcode settings. The existing temporary
occupancy capability is unaffected by this feature. User
lockout hides the icons that are not operable. The lockout
levels are described in Table 5.
Table 5: User lockout levels
Lockout Capability
level
State 0 Provides full access to Home Screen
Display Adjustments and icons (default).
State 1 Hides the Menu icon.
State 2 Only allows the screen to trigger
temporary occupancy. Menu, Unit Power,
the Up and Down arrows, and Run/Hold
are hidden.
Using the USB port
Use the USB port to quickly and easily load firmware
upgrades, back up the current settings, and restore
settings to the TEC3000 by using a USB drive. The TEC3000
can recognize eight configuration files or firmware
package files. The USB drive format must be FAT or FAT32.
The drive cannot be NTFS format or USB 3.0. If you are
upgrading firmware or copying configuration files, you
need the passcode if one has been set up. Do not remove
the USB drive until the firmware upgrade is complete.
The TEC3000 may restart and go offline to the NAE after
a firmware upgrade. The upgrade takes approximately
three minutes.

Configuring the thermostat controller

Use the Menu icon on the home screen to access and
change the basic operating parameters of the thermostat
controller. During normal operation, press the Menu icon
once to access the following parameters:
• Fault Status
• Setpoints
• Schedule
Description
Deletes the scheduled event.
Clears the password entry on the
keypad screen.
Indicates that an error has
occurred.
13