Advertisement
Removing the air baffle from a 5105-22E, 9008-22L, 9009-22A, 9009-22G, 9223-22H, or 9223-22S
system
Use this procedure to remove the air baffle from a 5105-22E, IBM Power System L922 (9008-22L), IBM
Power System S922 (9009-22A and 9009-22G), IBM Power System H922 (9223-22H), or IBM Power
System H922S (9223-22S) server.
Procedure
1. Ensure that you have the electrostatic discharge (ESD) wrist strap on and that the ESD clip is plugged
into a ground jack or connected to an unpainted metal surface. If not, do so now.
2. Lift each air baffle (A) straight up.
See Figure 28 on page 43.
Place air baffles upside down on a clean area. When you turn an air baffle over, hold the detachable
drive cover to prevent it from coming loose.
Figure 28. Removing the air baffle
Common procedures for installable features 43
Advertisement
