Advertisement
2. For a rack-mounted system, remove the front cover by pulling it away from the system.
The cover has indentations (A) where you can hold it more easily. See Figure 5 on page 20.
Figure 5. Removing the front cover
Removing the front covers from a stand-alone 9009-41A or 9009-41G system
Use this procedure to remove the cover from a stand-alone IBM Power System S914 (9009-41A or
9009-41G) server so that you can access components or perform service.
Procedure
Remove the front covers by completing the following steps.
a) Insert the front door key into the lock as shown in Figure 6 on page 21. Twist the key to the left
(counterclockwise) to unlock the door. Horizontal is locked; vertical is unlocked. Open the front door.
20 Power Systems: Common procedures for installable features
Advertisement
