5. Check that the PRI cables are connected to the E1/T1 span connectors.
Inventory cards
Printing a PRI Gateway inventory (LD 117)
All installed PRI Gateways are included in the output of the Inventory feature when executed
for cards or for all devices.
To print the inventory card for the PRI Gateway, enter:
inv prt cards
The card inventory prints out as shown in this example:
...
PRI, 262, NTDW70AAE5 01 NNTML2????????????
PRI2, 264, NTDW70AAE5 01 NNTML2????????????
...
DPNSS1-DTCS, 266, NTDW70AAE5 01 NNTML2????????????
where:
field 1 = card type (PRI or PRI2 or DPNSS)
field 2 = loop number of the PRI Gateway for which the E1/T1 card is being used
field 3 = PEC code (NTDW70AAE5)
field 4 = release of the card
field 5 = factory code, source code, serial number, and manufacturing data of the card
Only E1/T1 cards and spans that are configured in the software are printed.
Media Gateway 1000E PRI Gateway Installation and Commissioning
DCHI is enabled and all configured channels are normally enabled.
Inventory cards
March 2013
129