Avaya Communication Server 1000 Installation And Commissioning Manual page 89

D-channel configuration example
Table 22: D-channel configuration example
the PRI Gateway of two D-channel interfaces on the same downloadable D-channel
daughterboard that serves two PRI2 loops as follows:
• Two PRI2/E1 loops (numbered 200 and 201) are configured (for example, superloop 4
0). Each loop simulates different physical cards (3 and 4).
• Two D-channel interfaces are defined to serve two different loops/spans (200 and 201).
They use the same downloadable D-channel daughterboard (port 0 and port 1) simulated
through the physical location of card 4.
Table 22: D-channel configuration example
Prompt
REQ
TYPE
...
PRI2
Media Gateway 1000E PRI Gateway Installation and Commissioning
Prompt Response
CTYP DCHI
MG_CARD supl sh card
PORT 1
... ...
DES DPNSS
DPNS YES
... ...
Response
CHG New data.
CEQU Make changes to common equipment parameters.
200 Digital loop (2.0 Mb) number 200.
Configure E1/T1 ports on a Call Server
Description
D-channel configuration on DCHI card Type
(NTAK93AB).
The physical card for the digital loop association
to the PRI Gateway.
The format is: superloop, shelf number, card
number.
Important:
If using a NTAK93AB daughterboard, even
card numbers are applicable (2, 4, 6, 8). If
using the onboard DPNSS/DASS, odd and
even numbers are applicable (1, 2, 3, 4, 5, 6,
7, 8).
Port number of the NTAK93AB for DPNSS/
DASS D-channel.
For a DPNSS/DASS D-channel, the port is
always 1.
Designator (up to 16 alphanumeric characters).
Digital Private Network Signaling.
on page 89 shows a configuration example in
Description
March 2013 89