Configure Isdn E1/T1 Trunks - Avaya Communication Server 1000 Installation And Commissioning Manual

5. In the From E-mail address field, type the e-mail address that the E1/T1 card uses
6. In the Administrator E-mail address field, type the e-mail address to which the
7. In the Outdated Reports field, select the number of days that the E1/T1 card keeps
8. To save the settings, click Submit.

Configure ISDN E1/T1 trunks

To define the parameters for the ISDN E1/T1 trunks, see
page 115. This basic configuration is used by the E1/T1 card to shorten alarm conditions if
the card is recovered from power-up or restarts.
Configuring ISDN E1/T1 trunks
1. On the Home - System Overview screen, select System Settings > E1/T1 ISDN
Media Gateway 1000E PRI Gateway Installation and Commissioning
Important:
The E1/T1 card uses SMTP. The e-mail server must support this protocol.
to identify itself (the default is MGP@company.com). This is the e-mail address that
appears in the From field of a received e-mail; some e-mail servers require this
information.
backup files are sent (the default is admin@company.com).
date-related files before they are deleted. The range is 0 to 120 days. If you select
0, the files are deleted at the end of the day.
Settings on the left pane.
The window shown in Figure 32: E1/T1 Settings window
Configure ISDN E1/T1 trunks
Configuring ISDN E1/T1 trunks
on page 116 appears.
March 2013
on
115