Chapter 14: Troubleshooting Fabric Attach; Verifying Fa Settings - Avaya Virtual Services Platform 7000 Series Troubleshooting Manual

Chapter 14: Troubleshooting Fabric Attach

This chapter contains details about how to troubleshoot common Fabric Attach (FA) problems you
may encounter.
Related Links

Verifying FA settings

Verifying FA message authentication status
Verifying FA per-port settings
Verifying discovered FA elements
Verifying FA settings
Use this procedure to verify the FA settings.
Procedure
1. Enter Privileged EXEC mode:
enable
2. Verify the FA settings:
show fa agent
Example
Switch(config)#show fa agent
Fabric Attach Service Status: Enabled
Fabric Attach Element Type: Proxy
Fabric Attach Zero Touch Status: Enabled
Fabric Attach Auto Provision Setting: Proxy
Fabric Attach Provision Mode: Legacy
Fabric Attach Client Proxy Status: Enabled
Fabric Attach Standalone Proxy Status: Disabled
Fabric Attach Agent Timeout: 75 seconds
Fabric Attach Extended Logging Status: Disabled
Fabric Attach Primary Server Id: <none>
Fabric Attach Primary Server Descr: <none>
Related Links
Troubleshooting Fabric Attach
July 2015
on page 101
on page 102
on page 102
on page 101
Comments on this document? infodev@avaya.com
on page 102
Troubleshooting Avaya VSP 7000 Series
101