Logging On To View Or Edit Data; Logging On To View Or Edit Data; First Time Log-On - Emerson Daniel Danalyzer 1000 Hardware Reference Manual

MODEL 1000
4.2

LOGGING ON TO VIEW OR EDIT DATA

4.2.1

First Time Log-On

To log on the first time, proceed as follows:
(1) Press the ENTER key to display the "Enter PIN:
(2) Type in the letters for your username, then press the ENTER key.
VERY IMPORTANT Each new Emerson GC unit is shipped with one "Super-user" named
EMERSON downloaded into its memory. Therefore, for the first log-on to a new GC unit,
enter the USERNAME: EMERSON.
To enter the username "EMERSON",
(1) Type in "E":
(2) Type in "M": Press and hold down the
(3) Type in "E":
(4) Type in "R":
(5) Type in "S":
(6) Type in "O":
(7) Type in "N":
OPERATION FROM LOCAL KEYPAD AND DISPLAY
Press and hold down the
key.
key.
Press and hold down the
key.
Press and hold down the
the key.
Press and hold down the
key.
Press and hold down the
the key.
Press and hold down the
key.
key, press the key twice, then release the
key, press the key once, then release the
key, press the key twice, then release the
key, press the key three times, then release
key, press the key once, then release the
key, press the key three times, then release
key, press the key twice, then release the
SEP 2005
x" prompt.
4-7