Introduction - Emerson Daniel Danalyzer 1000 Hardware Reference Manual

MODEL 1000
1.2

INTRODUCTION

The Emerson Process Management Model 1000 Gas Chromatograph is a high-speed GC system that
is factory engineered to meet specific field application requirements based on stream composition
and the anticipated concentration of the components of interest. The GC System typically consists
of three major components, the Analyzer Assembly, the GC Controller, and the Sample Conditioning
System:
Analyzer Assembly (Model 1000 Series) - Located near the sample tap in a freeze-protected
shelter. The Analyzer includes GC columns, detectors, preamplifier, stream switching
valves, and solenoids.
GC Controller - Located either integrally in the upper enclosure or made for mounting on a
standard 19-inch rack in a nonhazardous protected area, with or without a built-in keyboard
and LCD. The GC Controller includes electronics and ports for signal processing, instrument
control, data storage, personal computer (PC) interface, and telecommunications.
Rack Mount - Suitable for use in a nonhazardous environment.
Sample Conditioning System (SCS) - Located between the process stream and the Analyzer
sample inlet, usually mounted on the lower portion of the Analyzer stand. The standard
configuration SCS includes a mounting plate, block (or shutoff) valves, and filters.
Optionally, the SCS can be configured with Genie bypass filters, liquid shut-off valves, and
optional solenoids for stream switching; all of which can be enclosed in an electric (heat tape
design) oven.
DESCRIPTION
®
SEP 2005
1-3