Optional Tools And Components - Emerson Daniel Danalyzer 1000 Hardware Reference Manual

SEP 2005
3.2.5

Optional Tools and Components

Observe the following checklist of tools and components you may need for installing and using
the GC System:
(1) For operation in a nonhazardous area only: Printer and printer paper.
(2) For operation in a nonhazardous area only: An IBM-compatible PC and a "straight-
through" serial cable connection between the external DB-9 (female) serial ports of the GC
Controller and a serial port of the PC. (For details, see Section 3.4.3.)
SERIOUS PERSONAL INJURY OR DEATH POSSIBLE
Do not operate a PC or printer in a hazardous environment.
Failure to observe all safety precautions could result in serious injury or death.
If you are working in a hazardous area and need to perform routine operations, use the optional
keyboard and LCD that are built into the purged GC Controller (see Section 4 this manual). To
make more significant program changes, however, use a remotely connected PC and the software
program MON2000. (See the MON2000 Software for Gas Chromatographs User Manual, P/N
3-9000-522, for instructions on operating the PC software, MON2000.)
(a) PC Specifications: Refer to Section 1.4.1, Minimum PC Requirements.
3-18
Observe Precautions and Warnings
1
Plan Site Location
2
Obtain Supplies and Tools
3
Install Analyzer Wiring
4
MODEL 1000
INSTALLATION AND SETUP