System Management; Figure 3-12.System Management Configuration Menu - ADTRAN MX2800 M13 User Manual

Section 3, Configuration
4.

SYSTEM MANAGEMENT

Configure the MX2800 for management through SNMP, Telnet, or a VT100 interface. See
page 3-16. Embedded SNMP and Telnet are available via a SLIP/PPP modem port or 10Base-T Ethernet
interface. This menu also includes options used to customize the unit's alarm and trap generation, security
setup, and equipment identification. The fields of the System Management Configuration menu vary
depending upon the configuration of the options in the shelf.
Configuration changes to Local IP Address, Gateway IP Address, Subnet
Mask, and IP Hosts will not be implemented unless all Telnet sessions are
closed. Changes made while Telnet sessions are active will invoke a
warning message on the console.
If the unit is not equipped with an internal modem,
be available.
3-16
Figure 3-12. System Management Configuration Menu
CAUTION
NOTE
Dialup Option
MX2800 M13 Multiplexer User Manual
Figure 3-12
will not
61200290L1-1G
on