Section 3, Configuration
MX2800 M13 Multiplexer User Manual
NOTE
Settings should be applied following each change.
Figure 3-6. Set Multiple Menu
T1/E1 Line Coding
Set the line code for each individual T1/E1 interface to match the connected device. See
Figure 3-7
on
page 3-11. The choices available for T1 are AMI and B8ZS. The choices available for E1 are AMI and
HDB3. Select Set Multiple to set a contiguous group or all of the T1s (or E1s) to the same value at the
same time. Refer to
Set Multiple
on page 3-9 for a description of the
option.
Set Multiple
3-10
61200290L1-1G