Auto Save; Craft Baud Rate; Utilities; Figure 3-17.System Utilities Menu - ADTRAN MX2800 M13 User Manual

Section 3, Configuration

Auto Save

Enable this function to save the configuration every five minutes and upon logout. Disable this option if
the configuration is not to be saved. The configuration may be saved manually from the Configuration
menu.

Craft Baud Rate

This value sets the rate at AUTO, 9600, 19200, 38400, and 57600 baud rate.
5.

UTILITIES

The System Utilities menu, see
ler cards:
• Self-test results
• Revert to default configuration settings
• Flash-load a new version of software
• Transfer configuration information to and from a Trivial File Transfer Protocol (TFTP) server
• Reset the system
Possible results for the self-test are listed in
3-38
Figure 3-17, is used to view MX2800 system information for both control-
Figure 3-17. System Utilities Menu
Table 3-7
MX2800 M13 Multiplexer User Manual
on page 3-39.
61200290L1-1G