Dst Automatic Adjustment; Local Time Zone; System Security; User Account Management - ADTRAN MX2800 M13 User Manual

Section 3, Configuration
• 40 minutes interval
• 45 minutes interval
• 50 minutes interval
• 55 minutes interval
• 60 minutes interval

DST Automatic Adjustment

This option sets automatic adjustment for North American daylight saving time. Available values are
Enabled and Disabled. The default value is Enabled. This automatic adjustment is performed only in
association with responses from the server. The automatic adjustment does not take place if the State
option is disabled and/or if the server cannot be contacted.

Local Time Zone

This option sets the time zone in which the MX2800 unit is located. Possible values consist of North
American time zones from Hawaii-Aleutian Standard Time to Atlantic Standard Time. The default value is
Eastern Standard Time.
The MX2800 processes only the Transmit Timestamp value of all SNTP
response messages. Other constructs supported by the protocol (such as
root delay, root dispersion, authentication, etc.) are not processed by the
MX2800.

System Security

User Account Management

This option is used to enter up to 15 user accounts. Each user account is assigned a username, password,
and privilege level. Usernames and passwords are not case sensitive but must be 12 characters or less. Each
user account is assigned a privilege level to provide the option of limiting a user's access to the MX2800.
The four privilege levels are listed below.

Guest

A user with this read-only privilege level can view almost all menu items on the console interface menus
and can perform a limited number of TL1 commands, none of which can alter the product's configuration.

Interface

A user with write-access privilege level can configure items related to the network interface and T1/E1
interface but can not initiate loopbacks and view and/or alter several system-level items such as LAN
configurables.
3-26
MX2800 M13 Multiplexer User Manual
NOTE
61200290L1-1G