User Interface; Introduction; System Management; Craft Interface - ADTRAN Total Access 1248 Installation And Maintenance Practice

INTRODUCTION

This section provides detailed information on the following:
•

"System Management"

• "Logging on to the Total Access 1248"
• "Menu Structure"
• "Menu Navigation"
• "Menu Tree" on page 5-7
• "Menu Descriptions"
SYSTEM MANAGEMENT
Total Access 1248 system management and provisioning is facilitated by a series of intuitive
menus that are accessible on a computer screen. The Total Access 1248 provides two methods
for management access:
•

"Craft Interface"

• "Inband Management Interface"
Craft Interface
Connection to the Total Access 1248 system menus can be made through the DB-9 connector,
labeled (see Figure
CRAFT
cable is required.
61179641L5-5C
Section 5

User Interface

on page 5-1
on page 5-4
on page 5-5
on page 5-8
on page 5-1
on page 5-2
5-1) on the front of the Total Access 1248 system. A DB-9 straight
,

Figure 5-1. Craft Port Location

on page 5-3
1179641L5
PWR
ALM
A B
-48V RET -48V RET
EXPANSION
USE COPPER CONDUCTORS ONLY!
OUT CRAFT
-48V .....,5.0A . .
5-1