Equipment Codes; Syslog Setup; Transmission; Host Ip Address - ADTRAN MX2800 M13 User Manual

MX2800 M13 Multiplexer User Manual

Equipment Codes

The Equipment Code supports 10 alpha-numeric characters and provides user-configurable text strings to
identify the MX2800 over the network.

Syslog Setup

These selections include Transmission, Host IP Address, Severity Level, and Host Facility.

Transmission

This option enables or disables the transmission of log events to the external Syslog server. The host IP
address must be defined first.

Host IP Address

This option specifies the IP address of the external server that is running the Syslog host daemon.

Severity Level

This option specifies the lowest level of severity that causes messages to be logged to the Syslog server.
The levels are listed in Table 3-6
ity level will be logged if a transmission is enabled.
Level
Emergency
Alert
Critical
Error
Warning
Notice
Info
Debug

Host Facility

This option specifies the facility destination of log events. Facilities are located on the host and are
managed by the Syslog host daemon running on either a UNIX machine or a PC. Options include
.
7
61200290L1-1G
in order of decreasing severity. Any message at or above a selected sever-

Table 3-6. Syslog Severity Levels

Description
The system is unusable.
An action must be taken immediately.
Shows critical conditions.
Shows error conditions.
Shows warning conditions.
Shows normal but significant conditions.
Shows informational messages.
Shows a debug-level message.
Configuration, Section 3
Local 0-
3-37