Table of Contents
Advertisement
74
en | System menus and screens
[On Output Command]
Transponder
[Previous]
[Next]
Bus X Point Y
[?]
[+]
[-]
Unlimited Retries
4.3.5
Transponder current status dialog
This dialog, accessible from the main menu under the Setup selection, provides a history of
communications involving the transponder selected in the transponder box. It also provides
several buttons that can be used to diagnose problems with the transponder and any of its
receivers or alert units.
2019.08 | V2.18.1.6 | DOC
When clicked, the checked horn-siren, green LED and strobe-red
LED outputs are turned on for the selected point on the selected
transponder. If the output does not change, , click the [Off
Output Command] button and then click the [On Output
Command] button again.
Selects the transponder that you desire to communicate with.
Returns to the previous transponder.
Advances to the next transponder.
This field displays the current bus number and point number.
The actual point number may be entered in the field to the right.
Opens up the Select Point dialog.
Advances to the next point.
Returns to the previous point.
When this checkbox is checked, the Central Console continues
trying to send commands to a transponder even if the commands
are not being acknowledged. (Normally, the Central Console
would cease after six retries and declare a communication
failure.) When this screen is closed, the system reverts to the
normal six retries.
Technical Reference Manual
Security Escort
Bosch Security Systems B.V.
Advertisement
Table of Contents
