Table of Contents
Advertisement
100 en | System menus and screens
Figure 4.50: Remote Connection Dialog
Set the modem port and speed in the Remote comm port setup dialog. The speed selected
should be greater than the speed of the modem and the same as the speed selected for the
remote system. Use the Backup command under the Utilities menu to create a database
backup to a disk. In the Remote setup dialog, assign a password and set which computer
(Master or Slave) is to answer and the number of rings to answer on. Also copy the map files
from the live Security Escort System. The map is in the "Escort" sub-directory and is named
MAP0.EDB. There may also be other maps with the names MAP1.EDB, MAP2.EDB, and so on.
In the Security Escort System used for remote access
This dialog sets up the remote access parameters that allow remote connection to a live
Security Escort System.
1.
2.
3.
4.
5.
6.
[Insert new]
[Edit]
[Delete]
2019.08 | V2.18.1.6 | DOC
Program all communication port indexes in the Transponder comm port setup dialog to
"None".
In the Remote comm port setup dialog, set the network port to "None" and set the
modem to the communication port of the modem. The speed selected should be greater
than the speed of the modem, and the same as the speed of the live system that is being
called.
In the Remote setup dialog, set the Master/Slave/remote setting to remote.
In the Remote connection dialog, select the [Insert new] button and enter a name,
password, phone number, and three-character file extension for this system's database
files. Using a disk written with the Backup command of the system you desire access to,
restore the database files. Select the system you just entered from the drop-down list in
the Remote connection dialog. Exit the Remote connection dialog.
Select Restore menu item under the Utilities menu. Restore from the backup disk to
each database. When completed, you should also store a copy of the map file in the
"Escort" sub-directory under the name MAP0.xxx, (where xxx is the three-character file
extension entered earlier).
In the Remote connection dialog, click the [Dial] button to call the remote system. If the
first 5, 8, or 12 characters of the password match, you can enter the system.
Technical Reference Manual
Clicking this button presents a blank Phone Book Edit
dialog to enter a new remote access Security Escort System.
Selecting the desired Security Escort System and then
clicking this button allows the existing Security Escort
System data to be edited.
Selecting the desired Security Escort System and then
clicking this button deletes the data for the selected
Security Escort System.
Security Escort
Bosch Security Systems B.V.
Advertisement
Table of Contents
