Table of Contents
Advertisement
Security Escort
[Dial]
[Answer]
[Disconnect]
[Cancel]
Phone Book Edit dialog
This dialog edits existing entries and adds new phone book entries for remote system access.
Figure 4.51: Phone Book Edit Dialog
System name
Phone number
Access password
Verify password
Bosch Security Systems B.V.
Selecting the desired Security Escort System and then
clicking this button attempts to connect the selected
Security Escort System. This selection is only available on
the remote computer; it is not available on a live Security
Escort system.
This option is only available in a live Security Escort System.
Clicking this button manually answers an incoming call from
a remote Security Escort System.
Clicking this button drops a remote connection. This can be
done either on the live system or the remote access system.
Clicking this button closes this dialog, but does not
disconnect a remote access connection. At this point, you
can navigate the menus and screens on the remote system
as if you were at the on-site slave computer system. To drop
the connection, return to this dialog and click the
[Disconnect] button.
This is a reference name for the Security Escort System to
be accessed remotely. This is the name of the desired
system to be accessed in the Remote connection dialog.
The phone number to be dialed to access the Security
Escort System. Enter a comma for each 2 sec. pause
desired.
This is the password used to gain access to the remote
Security Escort System. On the live system being dialed into,
set the remote password in the Remote Setup dialog. If the
first 5 characters of the password match, the remote system
allows read only access. If all 12 characters match, you can
change system parameters remotely.
For verification, retype the password entered into the
Access Password textbox.
Technical Reference Manual
System menus and screens | en 101
2019.08 | V2.18.1.6 | DOC
Advertisement
Table of Contents
